High Speed Abort Gates

conquest

Note

Units equipped with square or round flanges. Round flange units are longer than square flange units (see chart).

Operation

1. Signal from spark detection Panel operates solenoid latch, arm is released, abort gate opens, flow is diverted. Power out to alarm/light if desired.
2. After conditions are corrected, gate must be manually reset by lifting arm into solenoid latch. Signal from detection panel must be off.

Installation

1. Unit must be mounted horizontally in duct with exhaust cowl on top.
2. After installation unit must be manually and electrically tested to insure free gate movement.

conquest