The DYNALOAD Bin Filling System | High Speed Abort Gates | Turnkey Systems
High Speed Abort Gates

NOTE:
Units equipped with square or round flanges. Round flange units are longer than square flange units (see chart).

OPERATION:
1. Signal from spark detection Panel operates solenoid latch, arm is released, abort gate opens, flow is diverted. Power out to alarm/light if desired.
2. After conditions are corrected, gate must be manually reset by lifting arm into solenoid latch. Signal from detection panel must be off.

INSTALLATION
1. Unit must be mounted horizontally in duct with exhaust cowl on top.
2. After installation unit must be manually and electrically tested to insure free gate movement.
MODEL 12 16 20 24 28 32 36
A1 (ø IN/OUT) in 8 - 12 13 - 16 17 - 20 21 - 24 25 - 28 29 - 32 33 - 36
A2 (IN/OUT) in 12 16 20 24 28 32 36
B1 in 27 3/8 32 1/2 37 5/8 43 1/4 48 3/8 53 3/4 58 7/8
B2 in 30 5/8 35 3/4 40 7/8 46 1/2 52 5/8 58 63 1/8
C in 21 3/4 25 3/4 29 3/4 34 1/4 38 1/4 42 1/2 46 1/2
D in 31 7/8 39 7/8 48 56 64 72 80
APPROX. WT. LBS 175 230 290 345 405 460 520


Conquest Equipment Corporation
Head Office:
1-2073 Logan Avenue
Winnipeg, MB, R2R 0J1
Tel: (800) 786-6606
Fax: (204) 632-6613

Conquest Equipment Corporation
Calgary Area Sales Office:
79 Cranleigh Close, S.E.
Calgary, AB, T3M 1H6
Tel: (403) 850-6044
Fax: (403) 236-3706

Edmonton Area Sales Representative:
Tel: (780) 292-6044
Fax: (780) 438-3100

Westwood Conquest Group Inc.
Ontario Sales Office
1211 Gorham Street, Unit 15
Newmarket, ON L3Y 8Y3
Tel: (416) 271-1413